Precautions For Use - AEMC PowerPad III Quick Start Manual

This instrument is compliant with safety standard IEC 61010-2-030, the leads are compli-
ant with IEC 61010-031, and the current sensors are compliant with IEC 61010-2-032, for
voltages up to 600V in category IV or 1000V in category III. Failure to observe the safety
instructions may result in electric shock, fire, explosion, and destruction of the instrument
and/or other equipment.
• The operator and/or the responsible authority must carefully read and clearly under-
stand the various precautions for use of the instrument. Sound knowledge and a keen
awareness of electrical hazards are essential when using this instrument.
• If you use this instrument other than as specified, the protection it provides may be
compromised, thereby endangering you.
• Do not use the instrument on networks on which the voltage or category exceeds
those mentioned.
• Do not use the instrument if it appears damaged or otherwise compromised.
• Before each use, check the condition of the insulation on the leads, housing, and
accessories. Any item on which the insulation is deteriorated (even partially) must be
set aside for repair or scrapping.
• Before using your instrument, check that it is perfectly dry. If it is wet, it must be thor-
oughly dried before being connected or being operated in any way. This includes the
terminals and keypad.
• Use only the leads and accessories supplied. Using leads (or accessories) of a lower
voltage or category reduces the voltage or category of the combined instrument and
leads (or accessories) to that of the leads (or accessories).
• Always use personal protection equipment.
• Keep your hands away from the terminals of the instrument.
• When handling the leads, test probes, and alligator clips, keep your fingers behind the
physical guard.
• Use only the AC power cord and battery pack supplied by the manufacturer. They
include specific safety features.
• Some current sensors must not be placed on or removed from bare conductors at
hazardous voltages: refer to the manual and comply with the handling instructions.

Precautions for Use