Safety Information - EXFO FOT-5200 User Manual

2

Safety Information

Do not install or terminate fibers while a light source is active.
Never look directly into a live fiber and ensure that your eyes are
protected at all times.
Use of controls, adjustments and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure or impair the protection provided by
this unit.
When you see the following symbol on your unit
that you refer to the instructions provided in your user
documentation. Ensure that you understand and meet the required
conditions before using your product.
To prevent fire or injury:
Use an appropriate battery. Use only a battery approved for the

product.
Connect and disconnect the battery properly.

Do not disconnect the battery when the product is on.

Check the patchcord standard. Use the appropriate type of connector

for the product to prevent damage of connector or error of measured
value by checking whether the adaptor type is right for the connector
at time of purchase.
Follow all connector standards. To avoid damage or shock of product,

follow all instructions for connectors and product. Refer to the product
manual before connecting the product and check additional
information on adaptor.
CWDM Analyzer
W
ARNING
W
ARNING
I
MPORTANT
, make sure
5