Maintenance and Troubleshooting manual
00809-0200-3104
20. Adjust the security wire, removing all slack and thread into the lead seal.
21. Cut wire ends to remove excess wire.
22. If required, attach the security wire seals on the Base Enclosure.
Rosemount 3415, 3416 and 3417
Figure 3-18: Transmitter Electronics Enclosure security seals
A. Transmitter electronics enclosure endcap
B. Security seals
Figure 3-19: Meter with and without security shrouds
A. Transducer cable nut, cable and security seal
B. Security shrouds
Meter repairs
April 2022
73