Table of Contents
Advertisement
CLOSE-TO-CEILING INSTALLATION
Remove the fan from the hook on the
hanger bracket. Secure the canopy to the
hanger bracket as shown in Figure 16 with
four screws included with your fan.
9. ATTACHING THE FAN
BLADES
Insert the blades through the blade slot in
the decorative housing. Align the holes in
blade and blade bracket, secure with the
screws and washers provided. (Fig. 17)
10. INSTALLATING THE
MOUNTING PLATE
1. Remove the 1 of 3 screws from the
mounting ring and loosen the other 2
screws. (Do not remove)
2. Place the key holes on the light kit over
the 2 screws previously loosened from the
mounting ring, turn mounting plate until it
locks in place at the narrow section of the
key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed. (Fig. 18)
Outlet box
Hanger
bracket
Mounting
plate
8
Screws
Ceiling canopy
Figure 16
Slot
Blade
Screws with
washers
Figure 17
Mounting ring
Screws
Figure 18
Advertisement
Table of Contents
