Finishing The Installation - Savoy House 60-820-613-13 Owner's Manual

Step 3. (Figure 14) Receiver to House
Supply Wires Electrical
Connect the black (hot) wire from the
ceiling to the black wire marked "AC in
L" from the receiver. Connect the
white(neutral) wire from the ceiling to the
white wire marked "AC in N" from the
Receiver. Secure the wire connections
with the plastic wire nuts provided.
Step 4. (Figure 14) If your outlet box has a
ground wire (green or bare copper)
connect it to the fan ground
otherwise connect the hanging bracket
ground wire to the mounting bracket.
Secure the wire connection with a plastic
nut provided. After connecting the wires,
spread them apart so that the green and
white wires are on one side of the outlet
box and black and blue wires are on the
other side. Carefully tuck the wire
connections up into the outlet box.
Note: Fan must be installed at a maximum
distance of 30 feet from the transmitting
unit for proper signal transmission
between the transmitting unit and the
fan's receiving unit.
8. FINISHING THE
INSTALLATION
STANDARD CEILING INSTALLATION
Slide canopy up to the ceiling as shown in
Figure 15. Make sure you place the wires
safely into the outlet box. Secure the
canopy to the hanger bracket with the four
screws with your fan.
Connections:
wires;
7
Outlet box
Black (hot)
Black ("AC IN L")
Receiver
Black ("to motor L")
Blue (for light)
Blue (for light)
Black (motor)
Figure 14
Outlet box
Hanger
bracket
Figure 15
White (neutral)
Green or bare
copper (ground)
White ("AC IN N")
White ("to motor N")
Ground
(Connect to
ground wire on
(green)
hanger bracket
if no house
ground wire
exists.)
White (neutral)
Screws
Ceiling canopy