Table of Contents
Advertisement
4. MOUNTING OPTIONS
If there isn't an existing UL listed mounting
box, then read the following instructions.
Disconnect the power by removing fuses
or turning off circuit breakers.
Secure the outlet box directly to the
building
structure.
fasteners and building materials. The
outlet box and its support must be able to
fully support the moving weight of the fan
(at least 50 lbs). Do not use plastic outlet
boxes.
Figures 1, 2 and 3 are examples of different
ways to mount the outlet box.
Note: You may need a longer downrod to
maintain proper blade clearance when
installing on a steep, sloped ceiling. (Fig. 3)
To hang your fan where there is an existing
fixture but no ceiling joist, you may need
an installation hanger bar as shown in
Figure 4.
Use
appropriate
ANGLED CEILING
MAXIMUM 20° ANGLE
Recessed
outlet box
3
Outlet box
Figure 1
Outlet box
Figure 2
Provide strong
support
Ceiling
mounting
plate
Figure 3
Outlet box
Figure 4
Advertisement
Table of Contents
