TechniSat DIGITRADIO 650 Instruction Manual page 80

20.4 Time settings
> Press the MENU button and then select [Main menu] > [System Settings] >
[Time and Date].
> Select [Time/Date Setting] to set the time and date manually.
Use the OK button to select a value. Change it using the  or  buttons.
> Confirm by pressing OK.
> Select [Update setting] to determine whether the time update should be
automatic via DAB, FM or Internet or whether you would like to enter it manually.
> To do this, select [DAB+ update], [FM update], [NET update] or [No
update].
> Under the [Time format setting] option you can activate 12 or 24 hour
format. Confirm your selection with the OK button.
> Under [Set time zone], select the current time zone in your location and,
under [Summertime] you determine whether summertime should currently
be active. This setting is displayed only if you have previously selected NET
update under the update settings.
20.5 Language
> Press the MENU button and then select [Main menu] > [System Settings] >
[Language].
> Using  or , select one of the available Menu languages and confirm by
pressing OK.
20.6 Factory settings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations may no longer be received. In this case you can reset the device
to factory settings to delete all the saved stations and then launch a new scan.
> Press the MENU button and then select [Main menu] > [System Settings] >
[Factory settings].
> Confirm by pressing OK.
> Use  or  to select > YES and confirm the confirmation prompt by
pressing OK.
All previously stored stations and settings will now be deleted. After resetting,
you can start the set-up wizard (Section 20.8).
80