TechniSat DIGITRADIO 650 Instruction Manual page 78

20.1.1 My EQ setting
> In the menu select [System Settings > Equaliser > My EQ settings] and press
OK. Alternatively: Press the EQ (14) button on the remote control.
> Select [Bass] to increase/decrease the bass or [Treble] to increase/decrease
the treble.
> Change the value with the  or  buttons and then press OK.
This EQ preset can be called up at any time using the Equaliser setting My EQ.
20.2 Audio stream quality
The quality of the audio stream from the Internet radio station can be adapted to
suit the Internet speed (if available). The higher the quality, the higher the data
transfer rate.
> Press the MENU button and then select [Main menu] > [System settings] >
[Audio stream quality].
> Select a quality level and press the OK button to save.
20.3 Internet settings
> Press the MENU button and then select [Main menu] > [System Settings] >
[Internet settings].
In this menu you will find some settings and information about Internet connection.
20.3.1 Network Wizard
> Select [Network wizard] to establish a WiFi connection.
The network wizard shows you all the WiFi stations within range. Use the
/ and OK buttons to select the WiFi network you recognise, select
[Skip WPS] and enter the password using the displayed keyboard. Then
select
a connection to the network is now established. The signal bars
status bar of the display indicate whether a connection exists.
To cancel the input, select
mistake, you can delete the last letter you entered by pressing
78
and press the OK button. If the password entered is correct,
and press the OK button. If you make a
in the
.