TechniSat DIGITRADIO 650 Instruction Manual page 82

> Ensure that the device is within the reception range of the desired WiFi
network and that you have the access data. In some cases it may be
necessary to carry out some settings on the router. In this case, please refer
to the corresponding instruction manual.
After a search for available wireless networks you are shown the result.
> Select the desired wireless network and confirm the selection with OK. Select
Skip WPS to enter the password.
If it is a protected network you will be asked to enter the corresponding
access key.
> To do this, mark the respective character.
> Enter the selected character by pressing the OK button.
Proceed in this way until the complete access key can be seen in the input
field.
To cancel the input, select
mistake, you can delete the last letter you entered by pressing
> Then select
correct, a connection to the network is now established.
> When [Set-up wizard completed] appears on the display, press the OK
button.
For more information on setting up a network connection, please refer to
Section "20.3 Internet settings" on page 78.
20.9 Info
> Press the MENU button and then select [Main menu] > [System Settings] >
[Info].
> Confirm by pressing OK.
> The software version is shown.
82
and press the OK button. If you make a
and press the OK button. If the password entered is
.