Additional Parts - Honeywell CIPer 50 Installation & Commissioning Instructions

CIPer MODEL 50 CONTROLLER – INSTALLATION AND COMMISSIONING INSTRUCTIONS
TM

Additional Parts

A1 A2 A3 A4 A5 A6 A7 A8 A9 B1 B2 B3 B4 B5 B6 B7 B8 B9
A1 B1 A2 B2 A3 B3 A4 B4 G1 A5 B5 A6 B6 A7 B7 A8 B8
31-00233-02
Table 18. Additional parts
Order no.
XS830
XS831
G2
TPU-11-01
TPU-45-01
MVC-80-AC1
MVC-80-AC2
MVC-40-AC3
Description
Set of ten terminals. Each package consists of two
groups of nine internally connected push-in terminals,
for distributing signals / power.
Set of ten terminals. Each package consists of two
groups of four pairs of push-in terminals (each with a
499 Ω resistor), for converting 0...20 mA signals into
0...10 VDC signals, and one push-in ground terminal
per group.
Removable terminal plugs, push-in type; complete set
of 3 plugs (for terminals 1, 2, 24-32); for the WEB-
EHSERIESNX26.
Removable terminal plugs, push-in type; complete set
of 9 plugs (for terminals 1 - 47); for the WEB-
EHSERIESNX26.
Terminal cover (color: RAL9011); package of ten.
Front door mounting accessory (color: RAL9011);
package of 10.
Strain relief; package of ten.
44