Configuring the RS232 Interface in WEBs N4
When you configure the RS232 interface (for M-Bus) in WEBs N4, the corresponding Port Name will appear
as shown in Figure 5.
USB 2.0 Host Interface
Via its USB 2.0 Host interface, the CIPer Model 50 controller can be connected to, e.g., the IF-LON2 External
Interface Adapter and thus to L
Communications.
CIPer
MODEL 50 CONTROLLER – INSTALLATION AND COMMISSIONING INSTRUCTIONS
TM
Figure 5: Configuring the RS232 Interface in WEBs N4
W
networks. Max. 200 mA, high speed. See also section LonWorks
ON
ORKS
Figure 6: USB 2.0 Host interface
13
31-00233-02