While On An Active Call; Place A Call On Hold; Transfer A Call - Nortel 2007 User Manual

While on an active call

This section describes features available during an active call.

Place a call on hold

Use the Hold feature when talking on one line and another call arrives on
a second line. Retain the original call by putting it on hold, and then
answer the second call.
To place a call on hold
To retrieve a call on hold

Transfer a call

Use the Transfer feature to redirect a call to the appropriate person.
To use the Transfer feature to direct a call to a third party
Press the Hold
flashes beside the line on hold.
Note: If Automatic Hold is enabled, the
active call is automatically put on hold
when you answer the second call.
Tap the flashing line (DN) soft key.
1. Tap the Transfer
party is put on hold and a dial tone
sounds. The LCD indicator light flashes
steadily.
While on an active call
key. The LCD indicator
soft key. The other
77