Configure Area Codes - Nortel 2007 User Manual

Configure services on the IP Phone 2007

Configure Area Codes

The Area Code Setup menu enables a user to save up to three area
codes. When an incoming call arrives with an area code that matches one
of the three stored area codes, the incoming call number is reordered to
display the telephone number followed by the area code (as opposed to
the area code followed by the telephone number).
This reordering is also performed when a user scrolls through their
Callers List.
To configure an area code, tap the
Options, and select
To configure default area codes (three maximum)
52
Services
Call Log Option
1. Press the
scroll and highlight
2. Tap the
3. Press the
scroll and highlight one of the following:
— 1st Code:
— 2nd Code:
— 3rd Code:
4. Tap the
5. Use the dialpad to enter the new area
code at the prompt.
soft key, select
from the menu.
Up/Down navigation keys to
Area Code
Select soft key.
Up/Down navigation keys to
Select soft key.
Telephone
Setup.