Table of Contents
Advertisement
4.2 WebGUI
The WebGUI can be used to change the following configuration settings:
•
Device Info -- Device ID, Group ID
•
Password -- Enable Login, Change Password
•
RS-232 Baud Rate
•
Firmware Upgrade
•
Network Settings
•
Scaler Settings
•
Encoder Settings
•
System Settings
troubleshooting)
Both encoders and decoders can be password protected with a User Login,
which is enabled from the WebGUI.
Default Username is admin and password is admin
12
© Copyright 2019 Hall Technologies
(only for Sender)
(only for Sender)
(only for Receiver)
Figure 7 – FHD264 Login Page
-- Fail-Safe, OSD, Debug (for
Advertisement
Table of Contents
