Table of Contents
Advertisement
Figure 15 - Serial Over IP
To allow Full duplex communication with Serial device, each FHD264 has a
dedicated TCP server and client. See the FHD SoIP application notes for more
details and examples.
5.6 Fail-Safe (FS) Video Routing
Fail-Safe is a recovery system for the Receiver in case of a loss of video at
the Sender end. When FS is activated, the Receiver will automatically switch
to the assigned backup source (FS Group ID) if video is lost in the current
group. The Receiver switches back to its original group when the video signal
is restored. This powerful feature provides an additional layer of protection
for systems that need built-in video redundancy.
Figure 16 – Fail-Safe
Fail-Safe in the Receiver can be configured using the WebGUI or Telnet. If a
Receiver is displaying video from its Fail-Safe group, the following messages
will be displayed on the front panel LCD, OSD, and WebGUI.
Figure 17 -Fail safe notifications
Note: The FS Group ID cannot be same as the Main Group ID of the Receiver.
21
© Copyright 2019 Hall Research, Inc.
Advertisement
Table of Contents
