Contacting Hall Research; Specifications - Hall Technologies FHD264 User Manual

Dynamic virtual matrix, hdmi distribution and switching over lan with rs-232 & ir extension
Table of Contents

Advertisement

Q3. How to Change the IP address of the PC?
In Windows™, it is typically located under Start
Panel
Network Sharing center
settings
Properties
(TCP/IPv4).
For example, change the IP address field to 192.168.1.100
(0-255, except 11 or 12) and press "OK" to save the
configuration.
7.1 Contacting Hall Technologies
If you determine that your FHD264 is malfunctioning, do not attempt to repair
the unit. Instead, contact Hall Technologies Technical Support at 714-641-
6607. To return the unit to Hall Technologies you must first get a Return
Authorization (RMA) number. Package the unit carefully when returning. We
recommend that you use the original container.

8.0 Specifications

Input Resolution
Video Encoding
Streaming Protocol
Control Interface
Video Latency
Sender
Input Ports
Output Ports
Receiver
Input Ports
Output Ports
RS-232 Baud Rate
IR Frequency
Video Sources
Video Displays
Recommended Network
Switch/Router
Internet Protocol Version4
VGA or 480p thru Full HD 1080p@60
H.264
RTP/MPEG-TS/UDP
Casting
Unicast/Multicast
Telnet, Embedded Web Server
250-400 ms, dependant on Bit Rate and network
congestion
1 x HDMI
1 x RJ45, 1 x HDMI, 1 x IR, 1 x L/R AUDIO,1 x RS-232
1 x RJ45, 1 x IR
1 x HDMI, 1 x L/R AUDIO, 1 x RS-232
Bidirectional, pass thru: 2400 – 115200 bps
Audio
HDMI Stereo 2-channel
LPCM 2 Channel up to 48 KHz
38 -56 KHZ pass-thru modulated
56 KHZ (IR Remote Controller)
Up to 64
Up to 250+
Gigabit LAN
IGMPv2 and DHCP support
Control
Change adapter
© Copyright 2019 Hall Research, Inc.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fhd264-sFhd264-r

Table of Contents