Power Over Ethernet (Poe) - Hall Technologies FHD264 User Manual

NOTE
Factory resetting the FHD264 will restore the default Hall Technologies EDID to the
device. The user must confirm the action and take all necessary precautions to
prevent loss of data. Hall Technologies is not responsible for any damage that may
occur from the user attempting to modify the EDID

5.10 Power over Ethernet (PoE)

FHD264 Senders and Receivers utilize Power Over Ethernet (PoE),
eliminating the need to connect a power supply to the unit. The device gets
its power from the PSE (Power Sourcing Equipment) port in the Gigabit PoE
switch. An external power supply is included with each FHD264 if PoE is not
available.
24
© Copyright 2019 Hall Technologies