Hall Technologies FHD264 User Manual page 15

All Commands are
Terminated by <CR><LF>
(or Hex 0D 0A)
get_hdcp_status
get_video_lock
set_session_key [0xhhhh(1~32)]
set_screen off|on (Receiver ONLY)
Where off=blank on=unblank
get_screen (Receiver ONLY)
set_page_login [string(off|on)]
where off = Disable login for the web
page session (default)
on= Enable login for theweb page.
get_page_login
set_video_bitrate (Sender ONLY)
[string(fhd|hd|sd)][n(2000~18000)]
Where:
string(fhd|hd|sd)][n(100~25000)] can
be fhd, hd, sd and 12000
For example:
set_video_bitrate fhd 12000
get_video_bitrate [string(fhd|hd|sd)]
(Sender ONLY)
set_downscale_mode
string(fhd|hd|sd)] to
string(fhd|hd|sd)]
get_downscale_mode
string(fhd|hd|sd)]
(Sender ONLY)
set_video_out_mode
string(both_on|loopthrough|network|
both_off)] (Sender ONLY)
get_video_out_mode
(Sender ONLY)
set_osd [string(auto|on|off)]
Auto= OSD will turn off when there is
an input signal detected.
On or Off – OSD Stays on or off
forever
get_osd
Response
On/Off
Where On - Input Video with HDCP
Off- Input Video without HDCP
Lock
Unlock
Where Lock – Stable Input Signal
Unlock - No input video or
unstable
OK-Success
Error-Fail
Where
[0xhhhhh(1~32)]=0x000000~0xff
ff
OK – Success
Error – Fail
on
off
OK – Success
Error – Fail
on
off
OK – Success
Error – Fail
xxxx
OK – Success
Error – Fail
string(fhd|hd|sd)]
OK – Success
Error – Fail
string(both_on|loopthrough|netwo
rk|both_off)]
OK – Success
Error – Fail
Auto
On
Off
© Copyright 2019 Hall Research, Inc.
Function
Query the HDCP status of
the video input
Query the video stability
status
Set session key for
encryption
Set video blank/unblank
the screen
Query the device output
status
Set the login page for the
WebGUI
Query the webpage" login
enable" status
Set the max bit rate for the
TX to sender over the
network. Limits apply see
Section 10
Query the bit rate for the
TX
Scale down the input video
to lower resolution
Get the downscale mode
status
Enable the HDMI output
and network output
Query the Loop and
network output status
Set OSD mode of the
system
Query the OSD mode
status
15