Dräger Infinity Delta Quick Reference Manual page 12

INFINITY DELTA / KAPPA QUICK REFERENCE GUIDE
TO ACCESS PRIVACY SCREEN
Privacy screen is displayed at the bedside with all Monitoring and
Alarms taking place at the Central Station.
1. Press Menu fixed key.
2.
Highlight Privacy, click.
3. To release, press Main Screen key.
TRANSFERRING PATIENT DATA OVER THE NETWORK
1. Press the Menu fixed key. The main menu appears.
2. Scroll to Standby and click. The screen goes blank except for
the following message: Standby: Press Main Screen to resume
monitoring.
3. Press the Menu fixed key at the destination monitor.
4. Click on Admit/Discharge.
5. Click on Transfer to display the Transfer Patient Data menu. If
you are transferring data from outside the destination care
unit, proceed with step 6. Otherwise proceed with step 8.
6. Click on Select Care Unit to transfer from. A list of care units
appears (if you are monitoring only one care unit, this item is
ghosted).
7. Click on the care unit from which you are transferring data.
The selected unit appears next to Care Unit.
8. Click on Select Bed to transfer from to display beds currently in
standby.
9. Click on the source bed to display it on the menu.
10. Click on Start Transfer to this bed.
11. Click on Transfer to this bed to transfer patient data and dis-
play the message, Transfer In Progress, or on Cancel to return
to the previous menu.
12. Press the Main Screen fixed key on the source monitor to exit
standby mode.
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
|12
© 2014 Draeger Medical, Inc.