Overview; Figure 1-1: Front View Of Srf3-64-1X2 Chassis; Figure 1-2: Rear View Of Srf3-64-1X2 Chassis - evertz SRF Series Instruction Manual

1.

OVERVIEW

The SRF series RF passive splitters and combiners provide an economical method of splitting or
combining a number of RF signals in ratios of 1:2,1:4,1:8 or 1:16. They provide low insertion loss, high
return loss, flat frequency response and high isolation between channels. They can be used for signal
distribution in a RF facility, or used to expand the matrix size of Evertz Microsystems XRF1 (16x16) and
XRF6 (64x64) RF routers.
The SRF products feature RF coax connectors on both sides of the chassis for mounting on either the
front or back of the rack for ease of installation and troubleshooting.
monitoring port for troubleshooting and diagnostics in the RF plant.
The SRF1 series is housed in a 1RU frame and the SRF3 series are housed in a 3RU frame. RF
specifications are dependent on the split / combine ratio. The list below includes all possible options of
the SRF splitter / combiners.
SRF1 SERIES:
SRF1-16-1x2: 16-channel 1x2 splitter / 2x1 combiner
SRF1-8-1x4: 8-channel 1x4 splitter / 4x1 combiner
SRF1-4-1x8: 4-channel 1x8 splitter / 8x1 combiner
SRF1-2-1x16: 2-channel 1x16 splitter / 16x1 combiner

Figure 1-1: Front View of SRF3-64-1x2 Chassis

Figure 1-2: Rear View of SRF3-64-1x2 Chassis

Revision 0.3
SRF Series Splitters and Combiners
They also feature an input
Page-1