evertz SRF Series Instruction Manual page 2

CISPR 22 CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to the European Union EMC directive. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Changes or Modifications not expressly approved by Evertz Microsystems Ltd. could void the
user's authority to operate the equipment.
Use of unshielded plugs or cables may cause radiation interference.
interface cables with the shield connected to the chassis ground of the device must be used.
INFORMATION TO USERS IN EUROPE
INFORMATION TO USERS IN THE U.S.A.
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
NOTE
NOTE
These limits are designed to provide
WARNING
Properly shielded