Output Characteristic Curves; Figure 1.1 Output Power Vs. Power Setting; Figure 1.2 Display Vs. Open Circuit Peak Voltage - ConMed SYSTEM 5000 Operator's Manual

1.4

Output Characteristic Curves

Figure 1.1 illustrates output power delivered to rated load for all available modes. Figure 1.2 illustrates the
maximum peak voltage available at a given power setting and output mode. Section 1.2 specifies rated loads
and maximum power for each mode, while figures 1.3 – 1.11 illustrate output power delivered to a range of
load resistances for each mode.
5000
4000
3000
2000
1000
0
0
1-14
Displayed Setting

Figure 1.1 Output Power vs. Power Setting

100
Power Setting

Figure 1.2 Display vs. Open Circuit Peak Voltage

200 300