Explanation Of Symbols; Control Panel; Interior; Output/Control Panel - ConMed SYSTEM 5000 Operator's Manual

1.3

Explanation of Symbols

1.3.1

Control Panel

Note: International System 5000™ units use
symbols on the Control Panel. Some symbols are
replaced by words on the domestic (U.S.) units.
These words are indicated by bold text in the sym-
bol description.
Pure Cut waveform with minimum ther-
mal damage and hemostasis.
Blend 1 waveform with moderate
hemostasis.
Blend 2 waveform with medium
hemostasis.
Blend 3 waveform with maximum
hemostasis.
Pinpoint Monopolar Coagulation.
Standard Monopolar Coagulation.
Spray Monopolar Coagulation.
Micro Bipolar Coagulation
Macro Bipolar Coagulation
General Setup
Fluids Specialty Mode
Lap Specialty Mode
Single Dispersive electrode
Status/Alarm Indicator for single
monopolar dispersive electrodes.
Dual Dispersive electrode
Status/Alarm Indicator for dual
monopolar dispersive electrodes.
Pulse Mode
1-12
Bipolar Output
Current Indicator
Remote Power Control Key:
Press to enable or disable Remote
Power Control.
Program
Program Store Key
Selection Scroll Button
1.3.2

Interior

Protective Earth (Inlet
Connector)
High Voltage Circuitry
1.3.3

Output/Control Panel

Dispersive Electrode –
Connection for monopolar dis-
persive electrode.
ReadiPlug™ Universal Accessory
Receptacle
Hand-controlled Monopolar
Output: Connection for hand-
controlled monopolar accessories.
Bipolar Output: Connection for
bipolar accessories.
Caution: High voltage output.
Type CF: Patient connections are iso-
lated from earth and resist the effects
of defibrillator discharge.
RF Isolated: Patient connections are
isolated from earth at high frequency.
Consult accompanying documents
prior to placing equipment in service.