Table of Contents
Advertisement
Procedure
1. Select [QC Robby Mode].
2. Press [Start] and follow the instructions.
3. The CyView™ Robby Autoloader AddOn will open. Assign a new Tray ID, e.g.
"QCyyyymmdd".
4. Click [Start with new Tray].
5. Select each with QC material and insert the Wellname "QC". The correct order for
the QC material is important when measuring the wells.
6. Click "Back to CyView".
CyStain™ VitalCount QC Procedure | QC Manual | June 2021
Figure 9:Selecting QC Robby Mode
Figure 10:CyView AddOn
Figure 11:CyView TrayLayout
4 Operation
9
Advertisement
Table of Contents
