FNM HPE Series Owner's Manual page 88

8. Disconnect the pump and close the valve.
9. Refill the engine with new oil up to proper level.
Respect the environment. Exhaust oils are strongly
polluting .Follow the local regulations for disposal.
3.3.10.2 Transmission oil change
To properly change oil in your transmission, carefully follow the instructions indicated in the use and
maintenance manual of the manufacturer. You can refer to Chapter 3.7.1 - Specifications of
transmissions on page 110 for specifications on oil to use.
3.3.11 Service belts inspection and tensioning
Ordinary maintenance: made by the boat user and the workshop staff.
Always be careful when working on the belts.
To check the status of the service belt it is necessary to remove the belts cover from your engine.
Follow the instructions:
1. Remove the cover located on the front of the engine.
Attention: In case of HPE/P 40/150/150JD/170/170JD/190/190JD and HPEL 65/90 it is also
necessary to remove the whole intercooler and its support.
84
®
FNM HPE Series