1.3.1 Spare Parts
®
The exclusive use of FNM
original spare parts is an essential condition for a good maintenance of the
engine. The use of non-original spare parts may cause the warranty to expire and it also exempts the
®
company CMD S.p.A (owner of the FNM
brand name and logo) from any responsibility.
1.3.2 Responsibility
The responsibility of the Manufacturer is subject to the correct execution of the "Maintenance
Procedures" operations that are described in this manual. For this purpose, it will be necessary to
demonstrate that all the maintenance procedures and operations have been carried out according to
the manual and that, in case of extraordinary maintenance, the procedures and operations have been
®
carried out by FNM
Service centers.
The information featured in this manual only refer to the engine itself; more specifically, the illustrations
serve as a pure indication and the instructions are described in a purely functional way with the
purpose of providing help and guidance in carrying out the ordinary maintenance. The execution of
such operations may vary based on the configuration of the controls and/or accessories of the boat
where the engine has been installed. The information featured in this manual is correct at the time of
printing. The Engine Manufacturer reserves the right to make modifications without notice at any time
for technical or commercial reasons as well as for the need to abide by new regulations or norms. The
Engine Manufacturer declines any responsibility that may arise from possible mistakes and/or
omissions during the installation.
It is forbidden to alter the characteristics of the engine and in particular the configuration of the control
unit (or ECU box) because such modifications and/or alterations will invalid the warranty and safety
terms.
®
8
FNM
HPE Series