FNM HPE Series Owner's Manual page 75

3.3.1.2 Transmission oil level check
To check the transmission oil level refer to the user manual provided by the manufacturer of your
transmission.
3.3.2 Coolant level check
Ordinary maintenance: made by the boat user and the workshop staff.
To verify the coolant liquid level, take care to the boat and/or engine inclination.
1. Unscrew the coolant fill cap, then check that the fluid level is between minimum and maximum
limits (if present), or not excessively low.
2. If necessary top up to a maximum level.
In any case the coolant liquid level must be over the engine head to ensure a correct operation.
Always verify the good seal of the filter cap to avoid leakage after reassembly.
Never refill the coolant circuit with sea water!
Be careful when opening the cap of the expansion tank: pressurized liquid may splash
out and cause damage to property or persons.
®
FNM HPE Series 71