FNM HPE Series Owner's Manual page 108

10. Fill a tank with a proper mixture of fuel and injectors additive, like Bardahl
Connect the fuel suction hose to the tank return line. Run the engine for some minutes at the
minimum speed.
11. To prevent cylinders rusting, FNM
protective oil (MIL-L-2104, MIL-L-21260A) through the suction manifold (dismounted air filter)
and spin the engine without starting it to facilitate oil suction (this operation can be carried out
by spinning the starter motor and consequently the engine with the fuel supply line
disconnected to avoid starting and to facilitate only the movement/lubrication of the internal
parts).
12. Disconnect the electrical connections. Push the red stop button on the ECU box .
13. Clean the engine metal parts and spray the engine metal parts and the engine leverages with a
protective/unlocking spray to prevent rust. FNM
14. Lubricate the starter pinion and the mechanical connections (grooved joints, etc.)
15. Dismount the belts and store them preventing their deformation.
16. Disconnect the fuel line (inlet and outlet).
17. Spray the electrical connections with electrical connections protective spray.
18. Store the engine in a well aerated place avoiding humidity and steam to prevent rust forming.
19. For long storage of fuel in tank, FNM
antibacterial additives to prevent the proliferation of algae and deposits.
104
®
advises to spray or nebulize Vanguard
®
advises to use Bardahl
®
advises to use Bardahl
®
Injector Cleaner.
®
storage 30
®
K9spray.
® ®
DAB or IOSSO
Diesel fuel
®
FNM HPE Series