FNM HPE Series Owner's Manual page 110

9. Verify the belts and tighteners status.
10. Verify the integrity of the sea water pump impeller.
11. Check the integrity of the anodes in order to provide a correct one.
12. Verify and if is necessary grease: the starter pinion, (with white grease for gears Bardahl
Viscogrease), and the turbocharger actuator leverages.
13. Keep the engine on for some minutes then turn it off and check again the engine oil and
coolant levels.
14. Check for any leaks.
The engine is now ready to resume normal operation.
106
®
®
FNM HPE Series