FNM HPE Series Owner's Manual page 62

Command
Warm-up
Acquisition of the
command
-
58
Signalling Meaning
engines are controlled and the right trim device controls both trims (if any)
If both the levers of the Station which has the command are in neutral position and
- you press for 3 seconds the warm/sync button, the WARM-UP function is
activated.
If you press the Command button for 3 seconds the station takes the command of
-
the system, only if the control lever is in neutral
All LEDs with
Situation of system fault
fixed light
®
FNM HPE Series