FNM HPE Series Owner's Manual page 61

2.5.2.6 ID Labels
Under the base of each command station a level there are n. 2 labels with the serial number and the
code of the command station.
2.5.2.7 Commands and meaning of indicator lights
Command
-
-
-
FNM ® HPE Series
Figure 27 - Electronic throttle control box emergency lever
Signalling Meaning
Engine LED If the LED is on, the corresponding propulsion engine is idle.
If it is OFF the Station does not command the system.
Command LED
If it is ON the Station commands the system.
If the LED is blinking the navigation system is in WARM-UP mode that means that
Warm/Sync LED the engines can be warmed up because the clutch is disengaged.
If the LED is lighted, the system is in Synchro mode. With the right lever both
57