FNM HPE Series Owner's Manual page 122

Display views Status
Above 90 ° C
Glow plugs Lit, engine off
indicator light (if
present)
Blinking
Off
Transmission oil On, stern drive or gearbox
anomaly indicator installations
light
On, Saildrive installations
Alarm:
Displayed
CHECK ENGINE!
Alarm:
ENGINE
Displayed
EMERGENCY
STOP!
118
Meaning
Indicates an operating temperature too high. If the needle remains above
90 ° C for a long time the "High Engine Temp! Critical" alarm turns on
together with the buzzer and the warning lights. Turn off the engine
immediately and check the coolant level.
It indicates the glow plugs preheating required to properly start the
engine.
Indicates a critical engine failure. Contact a FNM
the diagnosis.
Indicates normal operation
Indicates the low level of oil in the transmission
transmission system with proper lubricant, then start the engine again. If
the problem persists, contact an authorized FNM® service point.
Indicates leakage of seawater from the Saildrive seals. Check the seal
status.
Indicates a failure of the engine. At the same time the alarm buzzer of
the panel turns on. The reason for which the indicator light turns on can
be:
Problem on injection system
-
ECU malfunction
-
Engine over heating
-
Make a diagnosis at a FNM
I
ndicates a serious malfunction of the engine
alarm buzzer of the panel turns on.
Turn off the engine immediately and check it. Make a diagnosis at a
FNM ® authorized service point.
® service point to make
Check and fill the
.
® authorized service point.
At the same time the
.
®
FNM HPE Series