Feider Machines FPG710-SH Instruction Manual page 10

1set carbon brushes

1 Screwdriver

6X clasp ring

1 hexagon spanner

1 handle

Technical data
Voltage/Frequency: 230-240V~ /50Hz
Power input: 710W
No load speed: 1000-2200rpm
Abrasive pad: 215mm
Sanding paper: 225mm
Protection class: II/回
Weight: 4.8kg
Sound and vibration
Sound pressure level LpA :79.9 d B ( A ) , K pA : 3 d B ( A )
Sound power level LwA: 90.9 d B ( A ) , K wA :3dB (A)
The impact of noise can cause damage to hearing.
Overall oscillation value determined according to EN 60745
Vibration emission value ah, DS=2,254m/s
Caution
The vibration value changes according to the area of application of the electric tool and
may exceed the specified value in exceptional circumstances.
The declared vibration value was measured according to the method described in a
standard and can be used for comparison. The declared vibration value can also be used
in a preliminary exposure assessment.
The vibration emission during actual use of the power tool depends on how it is used and
may differ from the total value shown. The safety measures necessary to protect the
operator should be identified based on an estimate of exposure under actual conditions of
use (taking into account all phases of the duty cycle, such as when The appliance is off,
when it is running empty, and when it is charging.
Keep the noise emissions and vibrations to a minimum.
Only use appliances which are in perfect working order.

Service and clean the appliance regularly.

Adapt your working style to suit the appliance.

Do not overload the appliance.

Have the appliance serviced whenever necessary.

Switch the appliance off when it is not in us.

Wear protective gloves.

2 ,Uncertainty K = 1,5 m/s 2
10