ABB ACS2000 User Manual page 76

Chapter 3 - Control system
3.2.2.1 Features and functions of the CDP control panel
Features
Functions
3-8 (26)
Legend
1 CDP control panel
2 SUPPLY OFF/DISCHARGING
3 SUPPLY ON/CHARGING
4 FAULT/ALARM
5 GROUND SW RELEASED
6 Emergency OFF pushbutton
Figure 3-7 Local operator panel
The key features of the CDP control panel include:
• 4-line display
• User selectable display of actual values, e.g. motor speed, current,
voltage, torque, power
• Fault memory to support maintenance
The CDP control panel allows the operator to:
• enter start-up data into the drive,
• control the drive by setting reference values and by giving start, stop
and direction commands,
• display three actual values at a time,
• display and set parameters,
• display information on the last 64 fault events.
See Chapter 8 - Local operation and Chapter 9 - CDP control panel for
further information.
2UEA001270 Rev. F
5
6
ACS2000 User manual
1
2
3
4