ABB ACS2000 User Manual page 170

Chapter 9 - CDP control panel
5 To change the
parameter value,
press:
• the corresponding
slow navigation
key for numbers
and text,
• the corresponding
fast navigation
key for numbers
only.
6 To accept the
selection and to return
to the actual signal
display mode, press
the ENTER key.
7 To cancel the setting
and keep the original
selection, press any of
the mode keys. The
selected CDP control
panel mode is entered.
9-14 (24) 2UEA001270 Rev. F
1 L -> 600.0 rpm
21 START/STOP MCB FUNC
07 PROCESS STOP MODE
[COAST STOP]
1 L -> 600.0 rpm
21 START/STOP MCB FUNC
07 PROCESS STOP MODE
COAST STOP
1 L -> 600.0 rpm
21 START/STOP MCB FUNC
07 PROCESS STOP MODE
STOP RAMP
ACS2000 User manual