ABB ACS2000 User Manual page 169

9.3.3.2 Setting parameters procedure
1 To enter the parameter
mode, press the PAR
key.
2 To select a different
group, press the
corresponding fast
navigation key.
3 To select a parameter,
press the
corresponding slow
navigation key.
4 To enter the parameter
setting function, press
the ENTER key.
ACS2000 User manual 2UEA001270 Rev. F
Chapter 9 - CDP control panel
1 L -> 600.0 rpm
22 RAMP FUNCTIONS
01 ACCDEC 1/2 SEL
ACC/DEC 1
1 L -> 600.0 rpm
21 START/STOP MCB FUNC
01 START FUNCTION
CNST DC MAGN
600.0 rpm
1 L ->
21 START/STOP MCB FUNC
07 PROCESS STOP MODE
STOP RAMP
1 L -> 600.0 rpm
21 START/STOP MCB FUNC
07 PROCESS STOP MODE
[STOP RAMP]
9-13 (24)