ABB ACS2000 User Manual page 140

Chapter 8 - Local operation
Legend
1 CDP control panel*
2 SUPPLY OFF / DISCHARGING
pushbutton / pilot light
3 SUPPLY ON /CHARGING
pushbutton / pilot light
4 FAULT/ALARM
pilot light
5 GROUND SW RELEASED
pilot light
6 Emergency OFF
pushbutton
* See Chapter 9 - CDP control panel for further information on the CDP control panel.
Figure 8-1 Local operator panel functions
8-2 (18)
5
6
- Starts and stops the motor
Displays status messages of AFE (Active Front
End) and INU (INverter Unit)
Displays alarm/fault messages of the drive and
monitored equipment
green Discharging - opens the MV switchgear and
light initiates discharge of the DC link
Solid on: DC link discharged
Flashing: charging or discharging
white Charges the DC link and closes the MV switchgear
light
Flashing: charging or discharging
Solid on: DC link energized (MV switchgear
closed)
blue Flashing: alarm
light
Solid on: fault
yellow Solid on: indicates that the grounding switch can
light be turned
- Removes power when pressed:
MV switchgear opens immediately and DC link
discharges
Motor coasts to a stop
2UEA001270 Rev. F
1
2
3
4
ACS2000 User manual