ABB ACS2000 User Manual page 165

7 To cancel the selection
and keep the original
selection, press any of
the mode keys.
The selected CDP
control panel mode is
entered.
9.3.2.4 Displaying a fault and resetting the fault history
1 To enter the actual
signal display mode,
press the ACT key.
2 To enter the fault
history display, press
either of the fast
navigation keys.
3 To select the previous
or next fault, press the
corresponding slow
navigation key. The
up key selects the
previous, the down
key the next fault.
ACS2000 User manual 2UEA001270 Rev. F
Chapter 9 - CDP control panel
1 L -> 600.0 rpm
ReadyOn
StateINU
MOTOR SP 0.00 rpm
POWER 0.0 kW
1 L -> 600.0 rpm
ReadyOn
StateINU
0.00 rpm
MOTOR SP
POWER 0.0 kW
1 L -> 600.0 rpm
1 LAST FAULT
+ PANEL LOST
0707730 12:30:02.3256
600.0 rpm
1 L ->
2 LAST FAULT
+ AMC: Fault Class 1
9 H 38 MIN 48 S
9-9 (24)