ABB ACS2000 User Manual page 33

1.4.1.2 Label location
ACS2000 User manual
Figures 1-2 and 1-3 indicate the placement of safety labels on the drive.
1 2
Legend
Item Label Number
1 2UEA001524T00XX Danger – Risk of Electric Shock. More than one
2 2UEA001528T00XX Danger – HIGH VOLTAGE Unauthorized Persons KEEP
3 2UEA001525T00XX Danger – Risk of Electric Shock. Disconnect power, allow
4 2UEA001634T00XX Notice – Ground Switch is locked when the "GROUND
5 2UEA001526T00XX Danger – This Equipment does not provide isolation.
Figure 1-2 Front of unit label locations
2UEA001270 Rev. F
3
4
Label Description
disconnect switch may be required to de-energize
equipment before servicing.
OUT
7 minutes for capacitors to discharge and ground
equipment before opening door.
SW RELEASED" pilot light is OFF. To ground equipment,
the pilot light must be ON before rotating the handle to
grounded (O) position.
Separate isolating means required. See Section 6.1.1
Isolating means (MV Switchgear) and Appendix G - MV
switchgear guide, located on the CD, for additional
information.
Chapter 1 - Safety
5
1-5 (12)