ABB ACS2000 User Manual page 115

ACS2000 User manual
2
3
Figure 5-8 - Frame 3 Redundant fan power supply connections
6 Route the fan wires and connect to the terminal block.
7 Check that the flapper is moving freely.
8 Reattach the rear panel and the cover of the fan unit.
Removal procedure is the reverse of the installation procedure.
2UEA001270 Rev. F
Chapter 5 - Mechanical installation
1
Legend
1 Terminal block X24
2 Wire numbers
3 Redundant fan
power supply
5-13 (14)