ABB ACS2000 User Manual page 161

Control panel overview
Fault memory
ACS2000 User manual
1 L -> 600.0 rpm
ReadyOn
StateINU
MOTOR SP 0.00 rpm
POWER 0.0 kW
The fault memory includes information on the 64 most recent fault events
that occurred in the drive. The name of the fault and the actual time are
displayed. The procedure for selecting and clearing the fault history is
described in section 9.3.2.5 Displaying and resetting an active fault.
When a fault or warning is generated in the drive, the message will be
displayed immediately, except when in drive selection mode.
Changing from the fault display mode to other display modes is possible
without resetting the fault first. When no keys are pressed, the fault or
warning text is displayed as long as the fault is pending.
2UEA001270 Rev. F
Chapter 9 - CDP control panel
Status line
Actual signal names and values
Selects the function mode
Selects actual signal/fault
Scrolls through signal/fault message
Enters the selection mode
Acknowledges the selection
9-5 (24)