Magnetic Card Reader - XAC xCL_AT-150 Series Installation Manual

4. U M
SING THE
Swipe the card through the slot with magnetic stripe side facing the same direction as the
display. (Figure 3)
5. U IC C
SING THE
Insert an IC card into the slot (Figure 4) with the chip side facing the same direction as the
touch panel (Figure 5).
6. U K
SING THE
After inserting the chip card, Press the numeric key as below keypad (Figure 6) to enter the
desirable numbers on touch panel. Press Cancel (X) key to terminate any current function and
press the Enter (O) key to confirm a value or an option.
C
AGNETIC ARD
R
ARD EADER
Figure 4
P
EY AD
R
EADER
Figure 3
(Figure 3)
Figure 5