Advertisement
FRONT AREA
REAR AREA
■
AT-150 Power spec:
Input: 5V DC, 2A
■
Power Adapter spec:
Input: 100 ~240 Vac
Output: 5V DC, 2A
This symbol is intended to alert the user before starting using the POS.
Caution:
use with this device. Use of any other AC adapter may cause a risk of fire or explosion.
Operating Temperature: 0
3. P
O
/O
OWER
N
To power on the device: Long press the Power button (Figure 2) > 3 seconds and the device
screen will be activated.
To power off the device:
1) Press the Power button > 3 seconds to shut down the device.
2) No action on device after 30 minutes.
NOTE: When there is no action on AT-150 after 2mins (adjustable), the device will enter sleep
mode. Please short press power button to wake up the device.
1
Printer Paper Cover
2
5" Display
3
Magnetic Strip Reader (MSR) slot
4
Power Button (Press > 3 seconds to power on/off)
5
Smart Card Reader (SCR) slot
6
Charging contact points (Optional)
7
USB port (type C) for charging
8
Battery Compartment
Use only the AC adapter approved and provided by XAC Automation Corporation for
C to 40
o
D
FF THE
EVICE
C
o
Figure 2
Advertisement
