Using The Magnetic Card Reader - XAC CL AT-170-R Series Installation Manual

Desktop/mobile payment terminal
Table of Contents

Advertisement

NOTE:
1.
When device is in idle or suspend mode, short press power button will wake up the
device.
2.
When device require to forced shut down, press and hold the power button for 10
seconds

4. USING THE MAGNETIC CARD READER

Swipe the card through the slot with magnetic stripe at the back side of the card.
(Figure 3)
5. USING THE IC CARD READER
Insert an IC card into the slot with the chip side facing upward (Figure 4).
Figure 3
Figure 4

Advertisement

Table of Contents
loading

Table of Contents