■
AT-170 Power spec:
Input: 5V DC, 2A
■
Power Adapter spec:
Input: 100 ~240 Vac
Output: 5V DC, 2A
This symbol is intended to alert the user before starting using the POS.
Caution:
for use with this device. Use of any other AC adapter may cause a risk of fire or explosion.
Operating Temperature: 0
3. P
O
/O
OWER
N
To power on the device: Long press the Power key (Figure 2) > 3 seconds until a buzzer sound
is heard, and screen is activated.
To power off the device:
1) Press the Power key > 3 seconds to shut down the device.
2) No action on device after 30 minutes
NOTE:
1.
When there is no action on AT-100 after 2mins (adjustable), the device will enter sleep
mode. Please short press power button to wake up the device.
2.
Long press for 10 seconds for Force Power Off.
4. U
M
SING THE
Swipe the card through the slot with magnetic stripe side facing the opposite direction of the
display. (Figure 3)
Use only the AC adapter approved and provided by XAC Automation Corporation
o
C to 40
D
FF THE
EVICE
C
AGNETIC
ARD
o
C
Figure 2
R
EADER