XAC xCL_AT-150 Series Installation Manual page 6

8-2 I T
NSTALL HE
STEP 1: Insert the battery connector into AT150 with correct direction as Figure 10.
STEP 2: After install the battery, close the bottom cover as Figure 11.
Figure 10
Bottom Cover Removal Warning
When removing the bottom cover and screws for the purposes of changing battery, remember to put
back the cover and screws before power on the POS.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Figure 8
B
ATTERY
Figure 9
Figure 11