Table of Contents
Advertisement
Residual risks
Even if you use this product in accordance with all safety requirements, the risk of injury and damage remains:
-
Adverse health effects resulting from vibration if the product is used for long periods or if it is not handled
properly and properly maintained
-
Risk of injury to persons and property caused by projectiles.
-
Prolonged use of this product which may expose the operator to vibration and may produce a so-called "white
finger" disease. To reduce risk, wear gloves and keep hands warm.
-
If any of the symptoms of "white finger syndrome" occur, consult a doctor immediately. Symptoms of "white
finger" include numbness, loss of sensitivity, tingling, tingling, and pain, loss of strength, color changes or skin
condition. These symptoms usually appear on the fingers, hands or wrists. The risk increases at low
temperature.
-
Inhalation of particles of blown / aspirated material.
-
Involuntary projections.
-
Contact with foreign objects.
-
Contact with tool during operation
Intended Use
This tool is designed for sanding materials and surfaces such as concrete or metal. With the accessories supplied
with this tool, the tool can also be used for corner grinding, grinding of concrete and polishing.
-
This product is intended for private domestic use only. It should only be used indoors.
-
This product is not intended for use in a closed room or in areas where gas and flames may be present.
-
Do not use this machine as described in this manual and only for the intended use as described above.
-
Any other use may result in damage to the appliance, property damage or body injuries.
-
No liability will be accepted for damage resulting from improper use or non-compliance with this manual.
Symbols
Class II protection product (double insulation)
Read instructions manual
Wear eyes protection
Wear hearing protection
Wear dust mask
In conformity with the European regulations
07
Advertisement
Table of Contents
