Outdoor Unit (Condenser) Installation - Sea Breeze SMZ18H46ZOGX Installation Manual

High efficiency series mini-split dual / triple / quad zone

Hide thumbs

Table Of Contents

Table of Contents

The location must allow easy servicing and provide good air circulation as shown in the illustration below:

12" or above

Space to the wall

Mounting the Outdoor (condenser) Unit

Follow the clearance guidelines in the

diagram above. Clearance distances

are minimums. Minimum clearance

above unit is 12" to allow for servicing.

Install drain plug as in Figure 7a

(included). Drain hose not included.

Do not mount this unit close to

combustibles or heat sources.

Although this unit is fairly quiet when

in operation, do not mount this unit

where noise issues could be a problem.

Mount unit on an equipment pad or solid surface, install drain plug and tube as necessary. If wall mounting is

necessary a wall mount bracket may be purchased (BR-440L) for this purpose. Follow mounting instructions for

bracket to ensure safe installation.

Anchor bolts of the proper size and type (Installer provided) must be used.

For best results mount this unit as close as possible to the evaporators. Check maximum line length

specifications before mounting.

MAXIMUM LINE LENGTH AND / OR HEIGHT MUST NOT BE EXCEEDED!

950-0195revJ