Introduction; Inspection; Description; Accessories - Martindale Electric ET5 Instruction Manual

1. INTRODUCTION

1.1 Inspection

Examine the shipping carton for any sign of damage. Inspect the unit
and any accessories for damage. If there is any damage then consult
your distributor immediately.

1.2 Description

The ET5 is an electrical tester with the following functions:
•
AC & DC current to 200A
•
AC & DC voltage to 600V
•
Resistance to 50MΩ
•
Capacitance to 5mF
•
Frequency to 1 MHz.
•
Temperature (K type thermocouple), -35°C to 500°C
•
Duty Cycle
•
Continuity with audible indication
•
Diode testing
Further functions are:
•
Non-contact voltage indicator
•
Simultaneous measurement
•
Auto power off
•
Display hold
•
Display backlight
•
Auto ranging
1.3 Accessories (included)
•
TL17 test leads
•
9V battery
•
K type thermocouple
•
Instructions

1.4 Battery Installation

Refer to Section 4.1 (Battery Replacement) for the battery installation
instructions for the ET5.
1