Ac Voltage Measurement; Dc Voltage Measurement - Martindale Electric ET5 Instruction Manual

One test lead may be attached to the side
of the electrical tester for ease of use when
making measurements.

3.12 AC Voltage Measurement

Connect the black test lead to the
lead to the
Set the rotary switch to the
The AC voltage function is manual ranging only, and defaults to the
500V range when this function is selected.
Taking all necessary safety precautions connect the test leads to
the circuit being measured and read the measured voltage from the
lower display.

3.13 DC Voltage Measurement

Connect the black test lead to the
lead to the
Set the rotary switch to the
8
+
terminal.
+
terminal.
CAT III 1000V CAT IV 600V
CAT II 1000V ONLY,
DO NOT USE on CAT III
or CAT IV installations
COM
terminal and the red test
Hz
position.
A
V
COM terminal and the red test
position.
A
V